Where the 2.5 Ton Electric Forklift Fits
Choose the HLCPD25-C when the working load fits a 2,500 kg rating at a 500 mm load centre and indoor air quality, noise or planned charging favors electric power.
- Check the heaviest load, not the average pallet.
- Measure aisle width and turning space against the 2,370 mm turning radius.
- Confirm floor condition, ramps and shift length before selecting the battery.
Load Centre, Mast and Attachment Check
The published capacity applies at the stated 500 mm load centre. Longer loads, higher lifts and attachments move the load centre and can reduce usable capacity.
- Send load weight and dimensions.
- State the required maximum lift height and lowered mast limit.
- Identify side-shifter, fork positioner, clamp or other attachment needs.
Battery and Charger Configuration
The source configuration uses a 60–72V / 210Ah lead-acid battery, with lithium available as an option. Battery sizing depends on operating hours, breaks, charging window and ambient temperature.
- Provide local input voltage, frequency and plug requirement.
- State single-shift, multi-shift or opportunity-charging use.
- Confirm battery and charger details in the final quotation.
Export, Packing and Support
The quotation should identify the battery, charger, mast, tyres, forks, attachments, packing method, Incoterm, destination port, warranty scope and documents. For later parts requests, provide the model, serial information and component photos.
MOQConfirm with configuration
Lead TimeConfirm with configuration
Warranty12 months
CertificateAvailable on request
What is the rated capacity of the HLCPD25-C?
The rated capacity is 2,500 kg at a 500 mm load centre. Longer loads, high lifts and attachments require a capacity check.
What battery does the HLCPD25-C use?
The source specification lists a 60–72V / 210Ah lead-acid battery, with lithium available as an option. Confirm battery and charger details for the intended shift and local electrical supply.
Is the HLCPD25-C suitable for cold storage?
It can be configured for cold-storage applications, but temperature, condensation exposure, shift duration, battery and electrical protection requirements must be provided before quotation.
Which mast and attachments can be quoted?
Mast height, side-shifter, fork positioner, clamps and other compatible options can be reviewed after the load, height and application are confirmed.
What are the MOQ and lead time?
MOQ and lead time depend on battery, charger, mast, attachments, branding and order quantity. They are confirmed in the model-specific quotation.
What information is needed for shipping and support?
Provide destination port and Incoterm for shipping. For later service or parts requests, provide the model, serial information, photos and fault description.
