Get Quote Team Become a Dealer

Buyer Guide

Diesel Forklift Engines: Specs by Model and What to Put in Your RFQ

Standard engines for HONGLI diesel forklifts from 2 to 10 t: XINCHAI C490BPG and A498BPG, QUANCHAI 4J1. Published specs, their limits, and an RFQ checklist.

By Avicii Meng, Head of Technical Engineering, HONGLI Machinery

HONGLI diesel forklifts are built with three standard engines. The 2–4 t models (HLCPC20 to HLCPC40) use the XINCHAI C490BPG. The 5 t HLCPC50 uses the XINCHAI A498BPG. The 6–10 t models (HLCPC60 to HLCPC100) use the QUANCHAI 4J1. This guide sets out the published engine figures for each model, what those figures can and cannot tell you, and what to include in your RFQ so the quotation matches your site. Already have your requirements? Request an engine and truck configuration quote.

Engine configurations by forklift model

Model Rated capacity (load centre) Standard engine Rated power Rated speed Max torque Transmission
HLCPC20 2,000 kg (500 mm) XINCHAI C490BPG 36.8 kW 2,650 rpm ≥156 N·m Mechanical or torque-converter
HLCPC25 2,500 kg (500 mm) XINCHAI C490BPG 36.8 kW 2,650 rpm ≥156 N·m Mechanical or torque-converter
HLCPC30 3,000 kg (500 mm) XINCHAI C490BPG 36.8 kW 2,650 rpm ≥156 N·m Mechanical or torque-converter
HLCPC35 3,500 kg (500 mm) XINCHAI C490BPG 36.8 kW 2,650 rpm ≥156 N·m Mechanical or torque-converter
HLCPC40 4,000 kg (500 mm) XINCHAI C490BPG 36.8 kW 2,650 rpm ≥156 N·m Mechanical or torque-converter
HLCPC50 5,000 kg (500 mm) XINCHAI A498BPG 45 kW 2,500 rpm 193 N·m @ 1,600–1,800 rpm Mechanical or torque-converter
HLCPC60 6,000 kg (600 mm) QUANCHAI 4J1 85 kW 2,200 rpm 500 N·m @ 1,650 rpm Torque-converter
HLCPC70 7,000 kg (600 mm) QUANCHAI 4J1 85 kW 2,200 rpm 500 N·m @ 1,650 rpm Torque-converter
HLCPC80 8,000 kg (600 mm) QUANCHAI 4J1 85 kW 2,200 rpm 500 N·m @ 1,650 rpm Torque-converter
HLCPC100 10,000 kg (600 mm) QUANCHAI 4J1 85 kW 2,200 rpm 500 N·m @ 1,650 rpm Torque-converter

The C490BPG figures follow the engine maker’s published rating, which gives a minimum torque without the speed at which it is reached. The rated capacity changes load centre at 6 t: 500 mm up to the HLCPC50, 600 mm from the HLCPC60. Compare rated capacities together with load centre, lift height, mast and attachments. The capacity information for the completed truck sets its operating limit.

What power, torque and drawbar pull tell you

  • Rated power (kW) is the engine output at its rated speed. It contributes to the truck’s ability to sustain travel and hydraulic work under load. Actual travel and lifting speed also depend on the transmission, hydraulic system, truck configuration and operating conditions.
  • Maximum torque (N·m) is the engine’s turning force at a stated engine speed. Starting and climbing performance also depend on transmission ratios, torque-converter characteristics, tyre traction and total operating mass.
  • Drawbar pull (kN) is the pulling force measured at the truck, after the transmission and tyres. On its own it does not tell you whether a truck suits a ramp: braking, stability, surface grip, test conditions and continuous-duty temperature matter as well. Our gradeability guide covers this in more detail.

Published figures for the 2–5 t models

The 2–4 t models share the same engine across a weight range of 3,050 to 4,600 kg. These are the published figures:

Model Service weight (unladen) Engine power per tonne of service weight* Travel speed, laden / unladen Drawbar pull, laden / unladen Gradeability, laden / unladen
HLCPC20 3,050 kg 12.1 kW/t 17 / 19 km/h 14 / 9 kN 15 / 20%
HLCPC25 3,170 kg 11.6 kW/t 17 / 19 km/h 15 / 10 kN 15 / 20%
HLCPC30 4,100 kg 9.0 kW/t 18 / 20 km/h 15.5 / 10.5 kN 15 / 20%
HLCPC35 4,400 kg 8.4 kW/t 18 / 20 km/h 16 / 11 kN 15 / 20%
HLCPC40 4,600 kg 8.0 kW/t 19 / 20 km/h 16.5 / 11.5 kN 15 / 20%
HLCPC50 5,500 kg 8.2 kW/t 22 km/h 15.5 kN 15 / 20%

*Rated engine power divided by unladen service weight, calculated by us. It is a descriptive ratio, not a performance rating, and it leaves out the load being carried.

The specifications list the same laden gradeability, 15%, for all six models. This figure does not state climbing speed, how long the climb can be sustained, or thermal performance, so it cannot tell you on its own which truck will do better on a long ramp. If your site has long or steep ramps, high ambient temperatures or high altitude, describe them in your RFQ so the configuration can be checked against them.

The 6–10 t models: QUANCHAI 4J1

From the HLCPC60 up, the standard engine is the QUANCHAI 4J1, rated at 85 kW and 500 N·m, with a torque-converter transmission. The published figures for the HLCPC60 to HLCPC100 are 26 km/h laden travel speed, 53–57 kN drawbar pull and 15% laden gradeability. Service weight ranges from 8,640 kg (HLCPC60) to 12,510 kg (HLCPC100).

Emissions configuration

For each model, a Stage V engine configuration fitted with a diesel particulate filter (DPF) is available, and so are non-Stage V configurations for markets that do not require it. EU Stage V limits are set by Regulation (EU) 2016/1628. Compliance applies to an exact engine type and approved configuration, not to an engine family name, so it is confirmed for each order.

  • Tell us the destination country and the emissions standard required there, if known. The proposed engine configuration and its supporting documents can then be checked before quotation.
  • For emission details and documents for a specific configuration, contact our sales team.
  • If you choose a DPF-equipped configuration, ask for the engine maker’s requirements for fuel, engine oil, DPF regeneration and maintenance, and check them against the fuel available on your site and your duty cycle.

Other engines

Other engines can be fitted on request. A change of engine has to be checked for installation, transmission matching, cooling, emissions and supply, so name the engine you want in your RFQ and ask for the quotation to confirm it.

Spare parts

Common spare parts in stock are dispatched within 24–48 hours once the part is identified. To identify a part, send the truck model and serial information, the engine model, the part number if you have it, and clear photos. For a fleet, you can ask for a set of routine service parts to be quoted with the trucks.

What to include in your RFQ

  1. Preferred model, if known, and quantity.
  2. Maximum load, load dimensions and load centre.
  3. Lift height, and any limit on mast height when lowered.
  4. Attachments needed.
  5. Working conditions: ramps (length and slope), surface, ambient temperature range, altitude, indoor or outdoor use.
  6. Daily operating hours and longest continuous working period.
  7. Destination country and port, and the emissions standard required there, if known.
  8. Engine preference, if different from the standard engine, and transmission choice for 2–5 t models (mechanical or torque-converter).
  9. Required delivery time, spare parts and documents.

Request an engine and truck configuration quote. Send your load, lift height, working conditions, destination and quantity, and ask for a quotation that identifies the engine, transmission and emissions configuration.

FAQ

Which engine does a HONGLI 3 ton diesel forklift use?

The HLCPC30 uses the XINCHAI C490BPG as standard, published at 36.8 kW at 2,650 rpm and at least 156 N·m of torque.

Can I get a non-Stage V engine?

Yes. Non-Stage V configurations are available for markets that do not require Stage V. Tell us the destination country, since the requirement depends on where the truck will be used.

Why do the 2–4 t and 5 t models use a different engine from the 6–10 t models?

The engines are matched to the truck size. The 6–10 t models weigh from 8,640 kg and carry rated loads at a 600 mm load centre, and they use the 85 kW QUANCHAI 4J1 with a torque-converter transmission.

Related: diesel forklifts · forklift gradeability guide · electric vs diesel forklift · request a quotation

Get a Quote · Chat on WhatsApp · Download Catalog (PDF)